Online Help

Online Help





Our Autofocal technology is brand new, so we’re sure you might have a question or two about our innovation.

Back to FAQs


Can anyone wear Autofocals?

In theory, yes. Although we primarily target customers aged 30+, who are more prone to weaker eyesight.

What is the difference between Multifocals and Autofocals?

Unlike Multifocal lenses, which feature a single layer lens, each pair of Morrow Autofocals feature two ultra-precise, thin-cut optical lenses, with a delicate layer of our pioneered Active Liquid Crystal embedded between them.
When you click the button to adjust your prescription, a small surge of electrical current passes through to the lens, instructing the Active Liquid Crystal to refract light in a pre-prescribed way. This allows you to switch up your vision from near to far in just 0.6 seconds and experience a significantly sharper focus and a much wider view; that will shorten your focal zones as your vision deteriorates.

How long does the battery last?

Our super-slim battery is energised to deliver (up to) 48 hours near vision in between charge cycles, and only requires 1 hour to recharge from zero to 100%.

Why do Autofocals have Bluetooth?

So you can connect your eyewear to any smart device, to provide battery status notifications and Autofocal Eyewear software updates.

Why do Autofocals fold differently?

Our fold makes space for our super slim battery unit.

Are Autofocals waterproof?

Morrow Autofocals are not fully waterproof, they are IP54 standard splash proof.

Every one of our frames is engineered and 3D printed to order. So we can assure your Autofocals will have a millimetre-perfect fit.

What is 3D-printing?

3D-Printing is the process we use to create your Autofocal frames. It’s an innovative way of forging three-dimensional objects, that are constructed layer-by-layer.

Why are Autofocals 3D-printed?

3D-printing enables us to create your Autofocals with the utmost accuracy and precision.

Our advanced Autofocals require a level of accuracy no other eyewear prescription could offer – and you’ll see the difference.

What is Precision-Fit?

All our Autofocals are Precision-FitTM for ultimate comfort. This means we take all optical measurements during your Eye Exam and calculate accurate dimensions for every detail, including your PD, Seg Height and Temple Zone. Precision-FitTM ensures your Autofocal frames are engineered to your exact fit.

Unclear on the specifics? Let’s delve into the nuts and bolts of your Autofocals.

Eyewear information

Processor: Nordic nRF52810
Memory: Embedded 192KB flash/ 24KB RAM
Physical factors: Unfolded: 250mm (L) x 144mm (W) x 47mm (H) Folded: 56mm (L) x 144mm (W) x 47mm (H) Weight: 35 g
Indicator: Tri-colour
LED Power: Panasonic battery = 15mAh
Active lens time = 8 hours standard conditions
Charging port rating = 5V ‹ 1A
Sensors: Tunable patented
Autofocal lens Activator: PE power button
Operating factors: 0°C to 40°C (DO NOT EXCEED) Water proofing to IP54 standard

Battery information

Nominal voltage: 3.8V
Nominal capacity: 15.0mAh
Reference for 0.2It discharge rate at 20°C
Minimum capacity: 12.7mAh
Reference for 0.2It discharge rate at 20°C
Maximum continuous current: Discharge 30mA (2.0lt)
Not applied to pulsed current
Maximum current: Charge 11.2mA (0.75lt) 6.0A (0.4It), if the temperature is 0°C to 10°
Voltage range: 3.0 ~ 4.35V

Charge method: Constant current – current voltage
Charge setting voltage: 4.35 ± 0.03V 4.30V and under, if the temperature is over 45°C to 60°C
Discharge end voltage: 0.03V
Charge setting time: 3hrs (standard)
Charge cut current: 0.8mA (standard) 0.5mA (minimum)
Operation temperature: Discharge -20 ~ 60°C Charge -00 ~ 60°C Charge setting voltage should be IP to 4.30V if the temperature is over 45°C to 60°C
Storage conditions: 1 Mth -20 ~ 40°C 3 Mths -20 ~ 30°C 1 Yr -20 ~ 20°C Recoverable capacity is over 10.1mAh after factory shipment. (The case of SOC 30%)
Weight: 0.5g (Typical)
Battery structure: Positive electrode made of lithium cobalt-oxide, negative electrode made of graphite, electrolyte made of organic solvent and lithium-salt.